PVC sheet has always been a very high-quality choice. There are many demands for PVC sheets in daily life. Reasonable use of PVC sheet in many directions can help very well, and the effect of product use will be better. In fact, fullstar PVC sheet also has many requirements and points of attention when choosing. This time, Fullstar PVC sheet manufacturer will talk about what needs to be paid attention to when purchasing PVC sheet.1 Design with lock There are roughly two types of PVC flooring on the market, one with locks and the other without locks. The floor without locks is similar to a flat plate, with glue on the back, which is fixed by glue. Products with locks have a lock design on the edge of the floor, and the two boards can be fixed by locks. Generally, products with locks do not have adhesive. When paving the floor without locks, manual alignment is required, and there are certain requirements on the hands-on ability of the paver. The floor with lock design is more concise and clear when paving, and the buckle firmly holds the floor and reduces the possibility of displacement. A good buckle fits tightly, the gap on the floor surface is small, and it also has a certain degree of dust and water resistance. It is not afraid that the floor will be warped or deformed, with a longer service life and better practicability.  2Glue-free installation, more environmentally friendlySome PVC floors come with glue on the back, just like double-sided tape, which can be fixed by tearing off the backing paper. However, there are two issues to consider for floors with adhesive backing. First of all, whether the glue itself is environmentally friendly, will there be a problem of excessive formaldehyde. Poor quality glue may have health risks. Over time, the adhesive may also age and harden, thereby reducing the fixing ability.  3With UV coating, strong practicability Although PVC material has good ductility, it is not as easy to expand and contract with heat and moisture as wood, but excellent waterproof and moisture-proof functions are necessary for PVC flooring. First of all, the surface of the PVC floor should be coated with UV, so as to avoid accidental sprinkling of water, the water will penetrate into the floor, causing long-term dampness and floor soaking, and it is more convenient for daily mopping and maintenance. The excellent PVC floor should also have a non-slip design, especially in the weather of the southern sky, to reduce the mutual penetration of water vapor on the floor and to better keep the environment dry. 4 Look at the number of wear-resistant revolutions, the higher the better PVC flooring is similar to laminate flooring, and its durability largely depends on the protective layer of the surface. The "strength" of the surface protective layer is usually expressed by the number of wear-resistant revolutions. The number of revolutions is a laboratory data used to measure the wear resist...

This time we will introduce to you about the performance parameters and uses of APET sheet. You can learn what kind of product it is through the introduction below. If you are more interested, you can take a look. !The parameters:1. The heated size changes longitudinally≤5% and transversely≤5%2. Transparency≤3%3. Sanitary performance meets the requirements of GB13113-914. Density 1.33g/cm oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa)5. Elongation at break: longitudinal 250%, transverse 250%6. Tensile strength longitudinal 53MPA moisture permeability ≈ 3G*mm/(M*24H) 　 horizontal 53MPA higher operating temperature of nearly 70 degrees7. Good adaptability to environmental protection, and can be recycled economically and conveniently; when its waste is incinerated, it does not produce harmful substances harmful to the environment.Main uses: electronics, food, toys, color box windows, collar supports  The thermoforming performance is good, which is comparable to ordinary PVC sheets. It can be vacuum formed to produce PET thermoformed products with excellent performance; PET sheets are considered to be an ideal packaging material that meets the requirements of environmental protection.After I give you an introduction, do you understand it better? In fact, there are many situations in life that you don't understand. If you are interested, you can learn more about it!

APET sheet is a material that is often used. In fact, this is also inseparable from its role. We can analyze the specific points from the following points. If it is not very clear, you can take a look. Maybe it will be helpful to you. ! It also allows you to have more knowledge of our products.1. APET sheet has good mechanical properties, impact strength is 3~5 times that of other films, and good folding resistance.2. APET sheet is resistant to oil, fat, acrylic acid, dilute alkali, and most solvents.3. APET sheet has low permeability to gas and water vapor, and has excellent gas, water, oil and odor resistance.4. APET sheet is a product with relatively high transparency, it can also block ultraviolet rays, and the gloss performance is also very good.5. APET sheet is a new type of hygienic, non-toxic, tasteless and environmentally friendly sheet, which can be directly used for food packaging.6. The heat resistance of pure APET sheet is not high, and the heat distortion temperature is only about 85°C, but it is greatly improved after strengthening treatment. The mechanical properties of PET reinforced by glass fiber are similar to engineering plastics such as PC and PA. The heat distortion temperature can reach 225℃; PET has good heat aging resistance, and the embrittlement temperature is -70℃, and it still has a certain temperature at -30℃. Toughness; PET is not easy to burn, the flame is yellow, and burning oil drips.

 There are many demands for PVC sheets in daily life. Reasonable use of PVC sheet in many directions can help very well, and the effect of product use will be better. In fact, Fullstar PVC sheet also has many requirements and points of attention when choosing.1Glue-free installation, more environmentally friendlySome PVC floors come with glue on the back, just like double-sided tape, you can peel off the backing paper to paste and fix. However, there are two issues to consider for floors with adhesive backing. First of all, whether the glue itself is environmentally friendly, will there be a problem of excessive formaldehyde. Poor quality glue may have health risks. Over time, the adhesive may also age and harden, thereby reducing the fixing ability.2With UV coating, strong practicabilityAlthough PVC material has good ductility, it is not as easy to expand and contract as wood, and is damp, but excellent waterproof and moisture-proof functions are necessary for PVC flooring.First of all, the surface of the PVC floor should be coated with UV, so as to avoid accidentally sprinkling water, the water will penetrate the floor, causing long-term dampness and floor soaking, and it is more convenient to mopping the floor daily.The excellent PVC floor should also have a non-slip design, especially in the weather of the southern sky, to reduce the mutual penetration of water vapor on the floor and to better keep the environment dry.3 Look at the number of wear-resistant revolutions, the higher the betterPVC flooring is similar to laminate flooring, and its durability largely depends on the protective layer of the surface. The "strength" of the surface protective layer is usually expressed by the number of wear-resistant revolutions.The number of revolutions is a laboratory data used to measure the wear resistance of the floor surface. According to national regulations, the number of revolutions of the household floor is between 4000 and 6000 revolutions. The higher the number of revolutions, the higher the wear resistance of the floor surface, and the more the floor can withstand injuries such as dragging tables and chairs, trampling on high heels.

PVC sheet roll has non-flammability, high strength, weather resistance and excellent geometric stability. PVC has strong resistance to oxidants, reducing agents and strong acids. However, it can be corroded by concentrated oxidizing acids such as concentrated sulfuric acid and concentrated nitric acid and is not suitable for contact with aromatic hydrocarbons and chlorinated hydrocarbons.The melting temperature of PVC during processing is a very important process parameter. If this parameter is not appropriate, it will cause material decomposition. The flow characteristics of PVC are quite poor, and its process range is very narrow. In particular, PVC materials with high molecular weight are more difficult to process (such materials usually need to be added with lubricant to improve flow characteristics), so PVC materials with low molecular weight are usually used. The shrinkage rate of PVC is quite low, generally 0.2~0.6%.These are some of the characteristics of clear pvc sheet roll. You can take a look and understand them. They are quite good. If you like PVC sheet , GAG sheets, ABS sheets, you can take a look at Fullstar's products. Come and order if necessary!

PET anti-fog sheet is a product used to prevent fogging. It is widely used in many aspects. Using this product, we can enter a warmer place in winter without causing small water on the mirror surface. The fogging phenomenon of beads, so do you know the advantages of PET anti-fog sheet in production?1. It has good mechanical properties, the impact strength is 3 to 5 times that of other films, and the folding resistance is good, so there is no need to worry about folding easily.2. PET anti-fog film is resistant to oil, fat, dilute acid and alkali, and most solvents.3. Anti fog PET sheet has high transparency, can block ultraviolet rays, and has good gloss.4. The PET anti-fog sheet has low permeability to gas and water vapor, so it can block water vapor well, will not block light, and has excellent gas, water, oil and odor resistance.5. PET anti-fog film has good resistance to high and low temperature, and can survive in the bad environment of -70~150℃, but it will be relatively long at 120°, and the time when it exists at 150° It is relatively short, and has little effect on its mechanical properties at high and low temperatures.The above are the advantages of the Fullstar plastic sheets manufacturer and the PET anti-fog sheet we introduced in use. If you need it, you can contact our manufacturer. The manufacturer specializes in the production and development of APET, PVC, PETG, GAG and other plastic materials. The products are all environmentally friendly. It is safe and medical grade. We operate APET sheet wholesale and GAG sheet production. Please call us if you need it.